Beckhoff ZS1090-0003 User Manual download pdf

Pin assignment

Technical data

Transmission characteristics according Category 5

ISO/IEC 11 801:2002 and EN 50173-1

Protection level: IP 20

Mating face: RJ 45 according IEC 60603-7

Wire gauge data

: AWG 22 - 24 stranded

AWG 22 -23 solid

Wire insulation: max. 1.6 mm Ø

Temperature range: -40 °C ... +70 °C

Cable diameter: 6.5 mm - 6.9 mm

Mating cycles: min. 750

Housing material: Thermoplastic, black

Please refer to technical data sheet

Version 1.1 - 10/2014

Errors and technical changes excepted.

6. Put the splicing element and the RJ 45 data module

into the IDC assembly tool.

7. Press data module and element together with the

aid of the IDC assembly tool.

8. Remove the terminated data module from the

assembly tool.

9. Put on the upper shielding shell and press it over

the cable screen.

10. Put on lower shielding shell and lock it with the

upper shell with an audible “click”.

11. Push housing over the installed data module and

lock it with an audible “click”.

12. Tighten cable gland.

Assembly instruction

Only a few steps are necessary in order to quickly

and reliably attach an EtherCAT/Ethernet cable

to a Beckho ZS1090-0003 connector using IDC

technology.

1. Push the cable gland and housing over the cable

sheath.

2. Strip the sheath to a length of 24 mm and the

shielding screen to a length of 13 mm.

3. Prepare the individual wires for insertion into the

splicing element according to the colour code.

4. Insert the wires into the splicing element up to the

end of the wire chambers.

5. Push the splicing element onto the RJ 45 data

module and engage.

Description

The ZS1090-0003 is a RJ 45 EtherCAT/Ethernet

connector to which AWG 22 wires can be attached by

the way of IDC technology. The connector is designed

with a standard grid dimension of only 14 mm, which

guarantees optimum component density in all

applications. The connector gives the user the option of

connecting an EtherCAT/Ethernet installation cable

directly to an IP 20 device inside the control cabinet.

This is achieved by feeding the cable through a suitable

IP rated gland at the cabinet wall, terminating the

connector inside the cabinet and nally plugging it into

the IP 20 switch. This translates into signicantly lower

installation costs by the elimination of the need for a

feed through connector at the boundary of the

IP 67/IP 20 areas. Higher reliability is also a benet due

to the reduced number of contact and connection

points.

Recommended cable type

The Beckho ZS1090-0003 EtherCAT/Ethernet

connector is optimised to be assembled with

the Beckho ZB9010 EtherCAT/Ethernet cable

(shielded, twisted pair, AWG 22 solid), according

Category 5 cabling standard (ISO/IEC 11801:2002).

ZS1090-0003

EtherCAT/Ethernet connector

RJ 45, IP 20, four-pole, for eld assembly

Beckho Automation GmbH

Eiserstraße 5

D-33415 Verl – Germany

http://www.beckho.com

ENGLISH

24 mm

10 mm

Pin 2

(Orange)

Pin 1

(Yellow)

Pin 6

(Blue)

Pin 3

(White)

Function/

Wire colour

Signal

EtherCAT

EIA/TIA EIA/TIA No.

568 A 568 B

Transmission

YE WH GN WH OG 1

Data+/TD+

Transmission

OG GN OG 2

Data–/TD–

Receiver

WH WH OG WH GN 3

Data/RD+

Receiver

BU OG GN 6

Data/RD–

1 2

ZS1090-0003 1

Summary of Contents

Page 1 - ZS1090-0003

Pin assignmentTechnical dataTransmission characteristics according Category 5ISO/IEC 11 801:2002 and EN 50173-1Protection level: IP 20Mating face:

Page 2

KontaktbelegungTechnische DatenÜbertragungseigenschaften nach Kategorie 5 (Cat. 5)ISO/IEC 11 801:2002 und EN 50173-1Schutzart: IP 20Steckgeometrie:

Comments to this Manuals

No comments

Beckhoff ZS1090-0003 User Manual

Browse online or download User Manual for Equipment Beckhoff ZS1090-0003. BECKHOFF ZS1090-0003 Benutzerhandbuch

Summary of Contents

Comments to this Manuals

Related products and manuals for Equipment Beckhoff ZS1090-0003