Beckhoff C6640 User Manual download pdf (Page 33)

Appendix

C6640, C6650 31

Appendix

Technical data

Industrial PC

C6640, C6650

Dimensions (W x H x D): see chapter Assembly dimensions

Weight: C6640: 11 kg (basic configuration)

C6650: 12 kg (basic configuration)

Do not use the PC in areas

of explosive hazard

The Industrial PC may not be used in areas of explosive hazard.

The following conditions must be observed during operation:

Environmental conditions Ambient temperature: 0 to 55°C

Atmospheric humidity: Maximum 95%, non-condensing

Shock resistance

Sinusoidal vibration:

(EN 60068-2-6)

10 to 58 Hz: 0.035 mm

58 to 500 Hz: 0.5 G (~ 5 m/ s

)

During reading of CD-ROM: 10 to 58 Hz: 0.019 mm

58 to 500 Hz: 0.25 G (~ 2.5 m/ s

)

Impact:

(EN 60068-2-27) 5 G (~ 50 m/ s²), duration: 30 ms

During reading of CD-ROM: 5 G (~ 50 m/ s²), duration: 11 ms

Protection class Protection class: IP20

Power supply

100-240 V

power pack

Supply voltage: 100-240 V

50-60 Hz

Power consumption: C6640: 65 W (for the basic version)

C6650: 90 W (for the basic version)

Power supply

24 V

power pack

(optional)

Supply voltage: 22 – 30 V

Power consumption: C6640: 65 W (for the basic version)

C6650: 90 W (for the basic version)

Electromagnetic

Compatibility (EMC)

Interference resistance: according to EN 61000-6-2

Emitted resistance: according to EN 61000-6-4

Transport and storage The same values for atmospheric humidity and shock resistance are to be

observed during transport and storage as in operation. The shock

resistance during transport can be improved by means of suitably packing

the Industrial PC. The ambient temperature during storage and transport

must be between -20°C and +65°C.

Approvals

FCC: Federal Communications Commission

Radio Frequency Interference Statement

FCC Approval for USA This equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may

cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in

which case the user will be required to correct the interference at his own

expense.

FCC: Canadian Notice

CC Approval for Canada This equipment does not exceed the Class A limits for radiated emissions

as described in the Radio Interference Regulations of the Canadian

Department of Communications.

1 2 ... 28 29 30 31 32 33

Comments to this Manuals

No comments

Beckhoff C6640 User Manual Page 33

Comments to this Manuals

Related products and manuals for Computers Beckhoff C6640